Setup: | Aluminum |
Painting: | Scratch-resistant |
Dimensions: | |
Weight: | |
Connections: | Stainless steel |
Voltage: | AC 240V 50-60 Hz |
Motor: | 1,5Hp |
Power consumption: | 1,1KW – 6,1A |
Thermal protection switch: | Automatic thermal probe installed in the motor |
Protection: | IP56 |
Fan speed: | 2500 rpm |
Sound insulation class: | F Treated |
Air flow pressure: | |
Setup: | Aluminum |
Painting: | Scratch-resistant |
Dimensions: | 55x43xh48 |
Base Weight: | |
Motor Weight: | |
Connections: | Stainless steel |
Setup: | Aluminum |
Painting: | Scratch-resistant |
Open turret dimensions: | |
Weight: | |
Connections: | Stainless steel |
Voltage: | AC 240V 50-60 Hz |
Motor: | |
Power consumption: | |
Thermal protection switch: | Automatic thermal probe installed in the motor |
Protection: | IP44 |
Fan speed: | |
Maximum suction depth: | |
Dimensions: | |
Weight: | |
Connections: | Stainless steel |
Range: | Over18/20mt |
Consumption: | |
Concentrated liquid consumption: | Depending on the concentration of the liquid |
Snow making cannon
The Techno line of our production identifies products as well as high engineering content to high plug & play performances, with quick assembly without tools, avant-garde design and “artisan” manufacture.
This connotation gives uniqueness to your work equipment, making them look rough but with a very strong consistency.
This acronym embodies the spirit of the entire range. We produce a single machine with which, by simply changing the head, you can achieve different effects.
Who decides to invest in Techno Snow mfx 5.1, will buy a machine that is worth three!
In fact, just replacing the “MFX head” the machine will automatically transform into a “foam cannon” or “confetti cannon” saving almost 50%.
For the desired effect, we needed a machine with an important volume that, without compromising weight, had to achieve excellent results.
The choice of production of the entire aluminum structure proved to be successful!
The finish ennobles the super light alloy, forming a single body between metal, bottom and the epoxy paint fixed to the oven, making it in fact, indestructible and “scratch-resistant” in the recognizable original color tone of Starlights.
The artificial snow production system of this “Snow Start” machine was designed for “efficiency” and the result was no waste of liquid ready for use in any phase (start-up shutdown). Also “energy efficiency” has been considered and the machinery is, in terms of quantity produced, among those with the lowest environmental impact.
With numerous stainless steel components (zero rust and long life), a suitable thickness of the steel used (while remaining light and easy to handle), Snow Start was made using only “Quick connection” systems which also guarantee the absence of of liquid leaks.
Designed, designed, made exclusively in ITALY, as well as every single component! For us it is not only a reason for pride, but also a guarantee of quality, reliability control in every production phase up to the final test and above all, of great responsibility.
Testa foam
per ricreare un
effetto schiuma party
Serbatoio da 300lt
per miscelare
il concentrato
con l’acqua
Testa spara coriandoli
Tubo per aspirazione
dei coriandoli
For optimal operation, and for the safety of users (given the “Total Body” contact with the public) we recommend the use of only products guaranteed and certified in Italy such as our T Foam Fluid series.